• K3SP36B/C Hydraulic Pump Gasket
  • K3SP36B/C Hydraulic Pump Gasket
  • K3SP36B/C Hydraulic Pump Gasket
  • K3SP36B/C Hydraulic Pump Gasket

K3SP36B/C Hydraulic Pump Gasket

Pump cover gasket for SK60-7, YC85, LG918, Shandong Zhongyou 80/908 and Takeuchi 175. Confirm the pump code before ordering.
$0.00 $8.97
Wholesale:
10.00% Off
20-49
20.00% Off
50-max
Quantity
-
+
1 * $8.97 = $8.97
  • Description

Product Overview

This is the pump cover gasket for the K3SP36B/C hydraulic pump: a flat, black rubber part that sits between the pump body and its cover. It has an open centre for the rotating group and a run of mounting holes around the edge, so the cover bolts pass straight through it. When a small excavator pump comes off for a reseal or an overhaul, this is the piece that goes back on before the cover is torqued down.

Everything comes down to the outline. Two sellers can both advertise a main pump gasket and still be cutting slightly different bolt patterns, so buyers comparing one excavator hydraulic pump gasket with another are better off looking at the hole spacing than at the name on the listing. A gasket that lines up on all the holes is the right one; one that has to be persuaded is not.

It is a single flat gasket, not a kit. The shaft seal, the O-rings and the backup rings that live inside the pump are separate parts, and a pump that is being fully resealed will need those as well. This gasket closes one joint only — the one between the body and the cover.

Most of these go onto small excavators, mini diggers and compact loaders, the machines where the same pump turns up under more than one badge. If the pump on the machine matches this code, the badge on the boom does not change what you need.

Black gasket sealed in a clear plastic bag, WASON labelBlack shaped gasket inside clear plastic packaging with WASON text

Material & Sealing Surface

The gasket is cut from black rubber sheet with a matte, faintly tacky surface — a rubber hydraulic pump gasket rather than a paper, cork or fibre shim. That difference shows up on a cover that has been opened before: rubber gives slightly under the bolts and follows small surface marks instead of cracking outward from the bolt holes.

Parts books are inconsistent about the name. The K3SP36B hydraulic pump gasket appears as a hydraulic pump head gasket in some books, a cover gasket or a main pump gasket in others. What identifies it is the shape — the open centre, the run of mounting holes and a stepped outline that only sits one way round.

It seals the body-to-cover joint and nothing else. A leak that tracks down from the shaft area is a shaft seal job, and a pump that loses pressure internally is usually a wear-plate or rotating-group problem. Replacing this gasket will not fix either of those, and it is worth checking where the oil is actually coming from before the cover comes off.

Compound quality is where low-cost gaskets fall down. A soft or under-cured sheet squashes out under torque and takes a permanent set, and the joint weeps again well before the next service. If you are buying for stock rather than for one repair, it is fair to ask which grade of sheet the part is cut from.

A gasket can only seal a flat joint. A cover that has been over-tightened in the past can bow slightly, and no new gasket will pull it straight again. Check the cover face against a flat plate before fitting; if it rocks, the cover needs attention first.

Fitment & Machine Coverage

  • Kobelco SK60-7, Yuchai YC85 and LiuGong LG918. The three small machines most often listed against this pump code, and the gasket is the same part whichever of them is on the bench.
  • Shandong Zhongyou 80/908 and Takeuchi 175. Two more machines built around the same pump, so one gasket covers a wider spread of compact equipment than a single machine list suggests.
  • Ordering by machine name. If your parts book only lists the machine, quote the model and we will match it back to the pump. The sk60-7 hydraulic pump gasket is the same part whether you ask for it by machine or by pump code.
  • Cross-brand confusion. The same pump turns up under several badges, and fitment lists differ from one seller to the next. What settles it is the shape of the part in your hand, not the name on the machine.
  • Match the outline, not the label. Lay the old gasket on a flat surface and line up the mounting holes and the open centre. If they sit square, you have the right part even when two sellers describe it differently.
  • Where the pump code lives. It is stamped or cast on the pump body itself, sometimes on a small plate under the paint. A wire brush and a phone photo usually get you a readable number without taking anything apart.
  • If your machine is not listed. Loaders, backhoes and other compact machines running the same pump take the same gasket — send the plate details and we will confirm before you order.

Field Applications

  • Pump reseal in the workshop. A pump that comes off for a shaft seal or bearing job gets a new cover gasket as a matter of course. It is the smallest part of the repair and the one that decides whether the joint stays dry afterwards.
  • Leak repairs on site. When oil is tracking down the pump case and the machine is losing time, the cover joint is one of the first places to check once hoses and fittings have been ruled out.
  • Parts counters and resellers. This is a part that moves in larger quantities rather than one at a time, because several brands of small excavator share the same pump and therefore the same shelf space.
  • Preventive maintenance. Fleets that service pumps on a schedule replace the gasket whenever the cover is off, instead of waiting for a weep to show up between services.
  • Mixed-brand fleets. A contractor running several small machines of different badges often finds one excavator hydraulic pump gasket covers more than one of them, which simplifies what has to be carried in the service van.
  • Cross-brand matching. Shoppers who work across several makes judge an excavator gasket by how far the fitment list reaches. A list that stops at one brand leaves them buying the same part twice under two numbers.
  • Rebuild and resale. Machines being tidied up for sale get the pump joint cleaned and resealed, because a dry pump is one of the first things a buyer looks at.
  • Field service vans. A couple of these on board covers the most common small-excavator pump on most sites, and it is the part that stops a one-hour job becoming a two-day wait.

Gasket Specifications

Part typePump cover gasket (main pump gasket)
Alternative nameHydraulic pump head gasket
Material typeRubber hydraulic pump gasket
Colour and finishMatte black
ShapeFlat plate, open centre, multiple mounting holes, stepped outline
Position in the pumpBetween pump body and pump cover
Joint sealedBody-to-cover joint only
Quantity per packOne piece
PackingSealed clear bag with a printed part label
Matching methodPump code, machine model, part number or photo of the old gasket
Machine classSmall excavators and compact loaders

Installation Sequence

  1. Park the machine on level ground, lower the attachment and release hydraulic pressure before anything is opened. Let the oil cool down first — a warm pump drains faster but is unpleasant to work on and easier to distort.
  2. Clean around the pump before cracking the joint. Grit that drops into an open pump body is the most common reason a repair has to be done twice.
  3. Note where each bolt came from and lift the cover squarely, so the old gasket comes away in one piece if it can. An intact old gasket is the easiest thing to compare the new one against.
  4. Scrape the old gasket off both faces with a plastic or brass scraper. A steel blade will gouge an aluminium cover, and every gouge is a place the new joint can weep from.
  5. Wipe both faces dry and degrease them, then lay the new gasket on the cover and check that every bolt hole lines up before the cover goes back on.
  6. Set the cover down squarely and start the bolts by hand. The sk60-7 hydraulic pump gasket and its equivalents only line up one way round; if the cover has to be forced into place, the gasket is the wrong one.
  7. Torque in a cross pattern, in two or three stages, to the figure given in the pump or machine workshop manual. Do not guess the figure, and do not reuse bolts that are visibly stretched.
  8. Refill, run the machine up to working temperature and watch the joint. Re-check the torque once the pump has cooled — a joint that is dry when hot and dry when cold is a joint that will hold.

Ordering & Delivery

  1. Send the pump code from the plate first, plus the machine model if you have it. Orders that arrive with both are the quickest to confirm.
  2. Add a flat-on photo of the old gasket with a ruler alongside if the plate is worn or painted over. That is usually enough to check the outline, the hole positions and the centre opening before you commit.
  3. Tell us the quantity you need. A single gasket for a repair and a hydraulic pump gasket in a larger quantity for stock go through the same order, and we will confirm what is available at the time you ask.
  4. If you are switching from another hydraulic pump gasket brand, send their part number or the invoice line and we will cross-check it against the outline before the order is packed.
  5. Payment method, shipping cost to your country and the dispatch date are confirmed with your sales contact when the order is placed — nothing is assumed on either side before that.
  6. When the parcel arrives, lay the gasket on the old one or on the pump face before you torque anything. If it does not sit flat and line up, tell us before the cover goes on.

Scale & Supply Capability

Guangzhou Wason has been a go-to source for hydraulic pump gaskets and construction machinery parts since 2015, drawing on a broad network of trusted partners and holding stock for fast dispatch so common items move without long waits. Our catalogue covers the replacement parts we list, and we help customers combine mixed orders, check samples before dispatch and coordinate customized requirements when a standard item will not do. Customers across Africa, the Middle East and South America rely on us for steady supply, careful inspection and export paperwork handled end to end.

FAQ

Will the K3SP36B hydraulic pump gasket fit a machine that is not on the fitment list?

It may well. The gasket follows the pump rather than the badge on the machine, so a loader, a backhoe or a different excavator running the same pump takes the same part. Send the code from the pump plate and we will check the bolt pattern and centre opening against it before you order.

Can the sk60-7 hydraulic pump gasket be changed with the pump still on the machine?

Usually yes. On most small excavators there is enough room to lift the cover clear with the pump in place, provided you can reach the bolts and work clean. If access is tight, or the machine is muddy, taking the pump out is quicker and safer — a gasket that picks up dirt during fitting will weep again.

Is this the same as the dealer part number for the excavator hydraulic pump gasket?

It is a replacement part cut to the same outline, not a dealer-branded item. Dealers often list the gasket under the machine's own number while independent sellers list it under the pump code, so the two references rarely look alike. Send us the dealer number with a photo of the old gasket and we will cross-check the shape before you buy.

Can the old gasket be reused if it still looks intact?

Not safely. Once it has been compressed, a gasket takes a set and does not spring back, so refitting one usually produces a weep a short time after the pump goes back together. It is a small part beside the cost of a second repair, which is why most workshops keep a spare on the shelf and reorder hydraulic pump gaskets in convenient multi-packs.

Does the gasket need sealant or grease when it goes on?

In most cases no. A rubber hydraulic pump gasket goes on dry against clean, flat faces — sealant can stop the rubber seating properly and makes the next repair harder. If your workshop manual specifies a particular sealant for this pump, follow the manual rather than general practice.

Is this the hydraulic pump head gasket, or is that a separate part?

This is the flat gasket that closes the joint between the pump body and its cover, the part some parts books call the head gasket, the cover gasket or the main pump gasket. If your book shows a second hydraulic pump head gasket with its own outline, that is a different part and you would need both — send us the product and we will point out which one this replaces.

Customer Reviews
$0.00 $0.00
Please choose options.Back to top
Close
$0.00 $0.00
Message Us

Adding to cart succeed!

items in cart.

Subtotal:

Requires a minimum purchase of . And you still need to meet the requirements.

Proceed to Checkout Return to Shopping