AP2D36 Hydraulic Pump Gasket
- Description
Product Overview
The ap2d36 hydraulic pump gasket, listed for the Caterpillar E70B Second Type as the e70b hydraulic pump gasket, is the flat, contoured piece that seals the joint between the pump body and its cover. It has an irregular outline and several mounting holes, cut to the pump's own bolt pattern, so it sits down on the cover face without trimming, stretching or opening out a hole. Most of these gaskets go to pump rebuilders, repair shops, parts counters and owner-operators who handle their own maintenance, whether the request comes in as the AP2D36 number or as the sk60 hydraulic pump gasket.
Machine Coverage
- Kobelco SK60-2, SK60-3, SK60-5 and SK60-6 - the whole listed SK60 range is covered, so an early and a late machine can be served from one line instead of two, and the sk60 hydraulic pump gasket is the same part across all four.
- Caterpillar E70B Second Type - only the Second Type is on the fitment list. If your E70B is the earlier build, send the pump plate details before ordering the e70b hydraulic pump gasket, because the earlier pump may take a different cover gasket.
- Caterpillar E307 and E308B - both machines are listed, so a shop that sees either can pull from the same stock.
- Caterpillar E305.5 - the smallest Cat on the list, covered from the same sleeve as the E307 and E308B.
- Hitachi ZAX70 - the pump label on this gasket carries the ZAX70 reference, which helps when a box is being checked against a work order.
- R80-7 - listed alongside the Kobelco and Cat machines, so mixed-fleet shops need one reference rather than three.
- One part across the group - every machine above runs the same pump family, which is why a single ap2d36 hydraulic pump gasket serves all of them.
- Not on the list - send the machine model, the pump code and a photo of the cover face, and we will say whether this gasket or another family is the right one before you commit.
Gasket vs Full Pump Kit
This part is the gasket on its own: one flat piece, nothing else in the sleeve. When the pump is opened simply to stop a seep at the body joint and everything around it is dry, the gasket is usually the whole job.
A full reseal is a different piece of work. Once the pump is off the machine and stripped, the O-rings, shaft seal and other soft parts are already exposed, and a hydraulic pump gasket kit for the whole pump saves a second order and a second wait.
Parts counters that restock regularly buy the ap2d36 hydraulic pump gasket in larger quantities and keep a kit on the shelf beside it, because the customer who replaces a gasket often comes back for seals.
Shops that service these machines keep one gasket per pump family on the shelf so a weeping machine does not wait on a part; spares hold their shape when they are stored flat, dry and away from direct sun.
Specifications
| Part number | AP2D36 |
| Pump family | AP2D36 main hydraulic pump |
| Product type | Excavator hydraulic pump gasket (main pump gasket), supplied as the gasket alone rather than as a hydraulic pump gasket kit |
| Quantity per pack | 1 piece |
| Colour | Black |
| Form | Flat, contoured outline with several mounting holes |
| Surface | Matte black finish |
| Label marking | Part number, description and quantity |
| Sealing position | Between the pump body and the cover |
| Origin | Guangzhou, China |


Fitting & Care
- Park on level ground, shut the machine down and release hydraulic pressure before you open the pump area, and let the oil cool so nothing hot runs onto you or the machine.
- Clean the pump and the surfaces around it before undoing the cover bolts, so grit cannot drop into an open pump.
- Lift the cover, peel the old gasket away and wipe both faces dry, checking for scores, fretting or a bright wear ring that shows the cover has been moving.
- Lay the new gasket on the body face, line up every bolt hole and make sure the edge sits inside the joint with no overhang.
- Fit it dry unless the machine's service manual calls for a sealant, and keep any sealant away from an oil passage.
- Tighten the cover bolts in the manual's sequence and to its torque, working up in two or three stages instead of fully tightening one bolt at a time.
- Refill the pump, run the machine up to working temperature and look at the joint again after the first few hours of work.
Ordering & Delivery
| Order unit | Single gasket or multiple pieces |
| Quantity pricing | Steps down at 20 pieces and again at 50 pieces for larger ap2d36 hydraulic pump gasket orders; confirm the current tier with your sales contact |
| Payment terms | Agreed with your sales contact before dispatch |
| Stock and lead time | Confirmed when the order is placed |
| Packing | Clear sleeve per piece, with an outer carton for larger quantities |
| Shipping documents | Prepared for your destination and confirmed before shipment |
Scale & Supply Capability
Guangzhou Wason has been providing construction machinery parts since 2015. As a go-to source for excavator hydraulic pump gaskets, we draw on a broad network of trusted partners and hold stock for fast dispatch so common items move without long waits. Our catalogue covers the replacement parts we list, and we help customers combine mixed orders, check samples before dispatch and coordinate customized requirements when a standard item will not do. Customers across Africa, the Middle East and South America rely on us for steady availability, careful inspection and export paperwork handled end to end.
Cut to the pump pattern - the outline and bolt holes follow the cover pattern for this pump family, so the gasket drops into place without trimming or forcing a hole over a bolt. Checked batch by batch - incoming gaskets are opened and compared with the cover pattern and a sample kept on file; a batch that does not match does not go into stock. Stored flat, shipped flat - the sleeve keeps the gasket from creasing, because a fold pressed into a gasket becomes a leak path the first time the cover is tightened. Bought from partners we know - we work with hydraulic pump gasket partners we have used for years, which is what keeps the pattern consistent from one order to the next. Small part under real pressure - the joint has to stay oil-tight through heat cycles and pressure spikes, which is why this is a checked part rather than a low-value extra. A specialist line, not a general bin - pump gaskets are a category we handle every day, so the piece you receive comes from a line we know rather than from the bottom of a mixed box.
USD






