A8VO160 Hydraulic Pump Gasket
- Description
Product Overview
This A8VO160 hydraulic pump gasket is the main pump gasket for E330 and E330B excavators. It sits at the pump cover joint, where a flat sealing layer keeps hydraulic oil on the pressure side instead of letting it weep past the cover.
The part is a single replacement gasket, not a complete pump assembly or a hydraulic pump gasket kit. That suits a planned reseal, a cover-off inspection, or the point in a repair where the old gasket has hardened, torn or been crushed out of shape.
A gasket is a small part with a high cost of failure. If it does not sit flat or seal evenly, the pump has to come apart again, so the fitment check matters more than the price of the part.
Use it when the pump is already coming apart for a seal refresh, not as a way to chase a leak without finding the source. If the cover face, bolts or sealing surfaces are damaged, the gasket alone will not correct that.
If you usually compare hydraulic pump gasket specs, you’ll see the value in getting the right E330/E330B part the first time—no second teardown because a close-looking gasket didn’t match the cover.
Quality & Packing Checks
Before dispatch, the practical checks are simple: the hydraulic pump gasket seal should be free of creases and sit flat when the package is opened. A small part that arrives bent is not a spare, it is a delay.
Buyers comparing this with another brand's hydraulic pump gasket should ask for the same pump code and mounting position, not just a photo of a similar gasket, and should check whether the alternative is sold on its own or only inside an A8VO160 gasket set. The outline can look close on a phone screen and still be wrong at the cover.
When you order a hydraulic pump gasket from us, we check the part against the order reference, not just the carton label, so a mixed stock order does not put the wrong gasket in the box.
The printed packaging carries the main pump gasket description and quantity, so the part can be identified on the shelf without unfolding it. Keep the label with any spare stock for later reference.
If the part does not match the pump cover when you offer it up, stop before installation and send us a photo. Forcing a doubtful gasket into a pump repair only moves the problem to the first pressure test.
Fitment & Model Matching
- Match the machine first: this A8VO160 hydraulic pump gasket is listed for E330 and E330B. Have the model and serial prefix ready before you compare any other details.
- Read the pump plate, not only the machine decal. Excavator model names can cover more than one pump build, and the plate is the surest way to separate a 160-size pump from a different pump used on another E330 variant.
- Do not assume every E330 is the same. E330C can use a different pump size, so a gasket that fits an E330 or E330B is not automatically correct for an E330C.
- Place the old gasket on a clean bench next to the new one if you already have it, and compare the two before installation. A photo of both together is enough for us to check a doubtful match.
- If the old gasket is broken or missing, send a photo of the pump cover face and the mounting bolt pattern. That gives a practical second check when the model plate is hard to read.
- Tell us if the machine has been re-powered or the pump has been replaced. Mixed repairs are common in older fleets, and the pump on the machine is what the gasket has to match.
- Keep the old gasket until the new one is trial-fitted. Laying both on a clean bench makes a bent corner or a missed hole obvious before the pump goes back together.
Applications
- E330 pump cover reseal: when the cover is off for inspection and the old excavator hydraulic pump gasket has to be replaced, this gasket restores a clean joint before the pump returns to service.
- E330B scheduled maintenance: keep one on the shelf for planned hydraulic pump service so a routine reseal does not wait on a small part.
- Repair shop comeback control: a gasket that matches the cover and bolt pattern helps a workshop avoid a second teardown caused by a poor-fit part.
- Fleet maintenance: contractors running E330/E330B machines can hold a small stock against downtime during a busy season.
- Counter sales and resale: parts counters that serve mixed excavator brands can list this reference next to other hydraulic pump gaskets.
- Full rebuild support: when the job grows into a complete reseal, ask whether a hydraulic pump gasket kit is available for the same pump so the small seals are not missed.
Main Pump Gasket Specifications
| Property | Detail |
|---|---|
| Product type | Main pump gasket |
| Pump family | A8VO series, 160 size |
| Machine fitment | E330 and E330B |
| Mounting position | Main pump cover joint |
| Gasket form | Flat, rounded rectangular outline |
| Center | Open |
| Hole pattern | Perimeter mounting holes |
| Visible finish | Blue outer rim, white center panel |
| Supplied as | One gasket, not an A8VO160 gasket set |
| Packaging | Clear plastic sleeve or bag |


Sealing Points
The A8VO160 hydraulic pump gasket works as a flat seal, so it depends on clean, even clamping across the cover face rather than a thick bead of sealant. The open center keeps the pump's working area clear while the frame closes the joint around the outside.
It sits under the cover bolts, so it has to stay in position while the cover is lowered. If the gasket has to be stretched to line up, it is not seated correctly and should not be forced.
A fresh gasket gives the cover a clean contact face. Reusing a compressed or torn gasket is the usual reason a reseal starts weeping again after a short run, especially on a machine that works hard.
Oil, grit or a curled edge under the gasket can create a leak path that looks like a bad part. Wipe the faces dry, keep the gasket flat, and check that no old gasket material remains around the edge.
The gasket is one part of the sealing job, not the whole repair. When a pump is being rebuilt, check the shaft seal, O-rings and bearings at the same time so a new cover gasket is not let down by another worn seal.
Installation Sequence
- Clean the pump cover and mating face, then remove every trace of the old gasket. A scraper used flat is safer than a sharp tool that gouges the sealing surface.
- Lift out the old excavator hydraulic pump gasket and keep it for comparison. Check the new gasket against it before anything goes back on.
- Wipe the new gasket clean and keep it flat. Do not stretch it over the cover or force it into place; a forced gasket is already the wrong shape.
- Set the gasket on the cover face and lower the cover without sliding it across the face.
- Start the bolts by hand and bring them down in a crossing pattern so the cover seats evenly. Follow the pump or machine service manual for the final tightening sequence and torque.
- Refill with the specified hydraulic oil, start the machine and check the joint through a few warm-up cycles. Look for weeping at the cover edge, not only for a dramatic leak.
- Recheck bolt condition and sealing faces if any seep appears. A damaged cover face or stretched bolt will not be fixed by replacing the gasket again.
Ordering & Delivery
- Tell us the machine model, serial prefix and pump reference when you enquire. For E330/E330B work, that is usually enough to start the availability check; if the plate is unclear, send a photo of the old gasket or cover face.
- For a8vo160 gasket orders, ask for the current quantity break and packing options before you finalize the order. We will confirm what is in stock and what has to be brought in.
- For hydraulic pump gaskets, we quote against the reference you provide, so please do not order by machine name alone if the pump has been replaced or the model plate is missing.
- Confirm the dispatch date, shipping method and any export paperwork you need before payment. Lead time depends on stock at the time of order, so ask for the current position rather than relying on an old quotation.
- Mixed orders can be grouped by reference so receiving and shelf placement are quicker. Tell us if you need the cartons marked by machine model or part number.
- Payment terms, freight cost and any import charges are confirmed with your sales contact at the time of order. Ask for the full landed-cost picture if you are comparing offers.
- If you need the part for an urgent repair, say so when you enquire. We will tell you what can ship immediately and what needs a longer lead time.
Scale & Supply Capability
Guangzhou Wason has been providing construction machinery parts since 2015, drawing on a broad network of trusted partners and holding stock for fast dispatch so common items move without long waits. Our catalogue covers the replacement parts we list, and whether the job calls for a particular hydraulic pump gasket brand's part or a comparable line, we help customers combine mixed orders, check samples before dispatch and coordinate customized requirements when a standard item will not do. Customers across Africa, the Middle East and South America rely on us for steady supply, careful inspection and export paperwork handled end to end.
USD






